TECHNICAL PUBLICATIONS & SPECS

TITAN DIAMOND RESOURCE CENTER

Professional technical guides, blade matrix charts, and field manuals compiled for professional concrete saw operators and masons.

Featured Technical Guides

Technical Spec6 min read

Master Diamond Blade Selection Matrix

Matching bond hardness to concrete PSI, rebar density, and aggregate type to prevent segment glazing and maximize blade life.

Matrix Rule: Soft bond matrices (SMX10 series) are engineered for hard aggregates (quartz, river gravel, flint) so worn diamonds shed quickly, exposing fresh diamond edges. Hard bond matrices (SMX50 series) are formulated for green concrete and abrasive asphalt.

Shop Corresponding Saw Blades →

Jobsite Safety & Specs8 min read

Wet vs. Dry Concrete Cutting Operational Manual

Cooling slurry flow rates, dust suppression compliance, and RPM calculations for hand-held vs walk-behind saws.

Contractor Account Required for Full Manual

Engineering Report12 min read

ZENESIS™ Patterned Diamond Technology Whitepaper

How 3D grid diamond alignment reduces drag, increases cutting speed by 50%, and lowers saw motor stress.

Contractor Account Required for Full Manual

Field Operations10 min read

Core Bit Drilling & Rebar Penetration Guide

Preventing core bit chatter, binding in heavy rebar, and water swivel seal maintenance under high torque.

Contractor Account Required for Full Manual

Blade RPM & Spec Sheet PDF

Download printable jobsite reference sheets for hand-held, walk-behind, and masonry saw operating parameters.

Custom Application Support

Need a custom blade matrix for pre-stressed concrete or asphalt over concrete? Speak directly with a Titan sales technician.

Call Tech Sales: (800) 555-0199